DELTA SERTEC
A “plug and play” solution to optimize the technical supervision of a building by monitoring it remotely.
Le partenaire pour la captation, transmission et mise à disposition de vos données
ATEX Gazpar connector: IoT sensor for pulse meter
ATEX Gazpar connector: IoT sensor for pulse meter
Make your gas meters in ATEX zones communicate
Thanks to its pre-wired GAZPAR connector, this IoT sensor reads the consumption data from your gas meters to help you save energy.
It consists of an ATEX PULSE IoT sensor combined with a Gazpar connector.
Highlights OF THE IOT SENSOR
- Already pre-wired to a GAZPAR connector
- Periodic monitoring of fraud and leakage flows
- Alert when thresholds are exceeded
- Local or remote configuration
- Battery-operated product
- Data time-stamping (in LoRaWAN®)
- Network test at startup (in LoRaWAN®)
- ATEX product: used in an explosive atmosphere
- Gas & steam
- Zone 1: immediate proximity to the sensitive area
- Groupe IIC: hydrogen gases and vapors, acetylene …
- Dust
- Zone 21: immediate proximity to the sensitive area
- Gas & steam
SERVICES RELATED TO THE PRODUCT
CHARACTERISTICS OF THE IOT PULSE ATEX SENSOR
What does the connected sensor do?
monitor
- Periodically check gas meter readings:
- index transmission,
- flow monitoring (min/max)
Alerte
AND/OR Trigger an alarm when:
- when the flow rate exceeds a threshold (high/low)
- when a leak is detected
THIS SENSOR IS AVAILABLE IN GAS METER READY VERSIONS
FEATURES OF THE IOT SENSOR
Description
What are the technical characteristics of the connected sensor?
Features
- Periodic modes with or without history
- Data redundancy
- Configurable life frame
- Time stamping (LoraWAN)
- Network test on start-up (LoraWAN)
- Customisation of the join phase
- Alert on product error, configuration error, low battery
- Inductance of the cable < 0,004 milliH (mH)
- Cable capacity < 0,00012 microF (uF)
Gazpar connector
- 2-pin female connector
- Cable length: 1m
- Inductance of the cable < 0,004 milliH (mH)
- Cable capacity < 0,00012 microF (uF)
PULSE ATEX Specifications
- ATEX II 2 G D
- Ex ib IIC T4 Gb
- Ex ib IIIC T135°C Db
- -20°C < Tamb < +40°C
- Uo ≤ 3.9V; Io ≤ 6.1mA; Po ≤ 6mW; Co ≤ 440µF; Lo ≤ 930mH
Ui ≤ 15V; Ii ≤ 1000mA; Pi ≤ 3750mW; Ci = 0µF; Li = 126nH
General specifications
- Dimensions: 105 x 50 x 27 mm
- Weight: 70 g
- Casing: IP67
- Integrated fastening system: DIN rail, tube, wall mount, flange
- Operating temperature range: -20°C to + 40°C
- Soldered battery
Decoding
Datasheet
In what area does the IoT sensor operate?
LoRaWAN EU863-870
What are the part numbers of the sensor?
- ARF8230FA-B02 GAZPAR CONNECTOR LoRaWAN® EU863-870 – KARE+
Certifications:
Directive 2014/53/UE (RED)
What is the expected autonomy of the connected sensor?
Under the following conditions: 1 index per hour and 1 transmission every 4 hours (6 frames/day), 10,000 pulses and Pull-Up activated:
LoRaWAN EU863-870:
- SF7 > 10 years
- SF12: 9.3 years
To go further, all documents and tools related to the PULSE ATEX IoT sensor
Questions about using the PULSE ATEX? Consult our dedicated FAQ
Previous versions: to find all the documentation related to previous versions of this product, click here.
In what area does the IoT sensor operate?
Sigfox RC1
What is the sensor reference?
- ARF8230GA-B02 GAZPAR CONNECTOR Sigfox RC1
Certifications:
Directive 2014/53/UE (RED)
What is the expected autonomy of the connected sensor?
Under the following conditions: 1 index per hour and 1 transmission every 4 hours (6 frames/day), 10,000 pulses and Pull-Up activated:
Sigfox RC1 : 4,7 years
To go further, all documents and tools related to the PULSE ATEX IoT sensor
Questions about using the PULSE ATEX? Consult our dedicated FAQ
Previous versions: to find all the documentation related to previous versions of this product, click here.
Our solutions for different uses
Discover our case studies for optimising the use of your buildings while improving the organisation of your services.
Reduce
energy consumption
Meet
regulatory requirements
Guarantee
satisfaction of occupants
Protect
the building against damage
IBIS – Consumption monitoring
Make electricity and gas meters communicate to boost the energy performance of the building.
COOL ROOF: Controlling and reducing the thermal footprint of a building
Meet regulatory requirements, reduce energy bills and guarantee good thermal comfort to users with the CoolRoof solution.
Our product selection
To cover all your needs
Would you like to find out more?
Would you like more information about our products and services? Would you like us to help you deploy your IoT project? We’re here to help.
20 years
expertise to support you, from the diagnosis to the implementation of your solution
